October 2026
Why Does Rugby and Football Kit Shrink After a Few Washes?
Your new kit fit perfectly in August. By October half the squad can’t get it over their shoulders. Here’s what’s actually happening.

Shrinking kit is almost never a faulty batch. It’s heat. Specifically, it’s the gap between what the care label says and what actually happens in a washing machine or tumble dryer set on a quick, hot cycle because someone’s trying to get kit turned around for Saturday. Get the temperature and the drying method right and most modern kit fabric holds its shape wash after wash. Get it wrong and you’ll be reordering shirts by November.
The real cause: heat, not washing
Polyester and polyester-blend kit fabric is knitted under tension during manufacture. Heat relaxes that tension. Once the fibres relax, they don’t spring back — the garment settles into a smaller, denser shape permanently. This happens in the wash if the water runs too hot, but it happens far more aggressively in the tumble dryer, where temperatures run higher and the fabric sits against hot metal for longer.
Cotton kit — old-style rugby shirts, some retro styles — shrinks for a different reason. Cotton fibres swell and contract with moisture, and high heat accelerates that contraction permanently. Either way, the dryer is usually the bigger culprit than the wash.
What temperature should kit actually be washed at
30°C to 40°C for most polyester match and training kit. Check the label — away kit, sponsor-printed shirts and anything with heat-transfer numbers often specifies 30°C specifically because the printed vinyl and the shrink risk both sit at that lower end. Washing at 60°C “to be sure it’s clean” is the single most common cause of a squad’s kit shrinking a size within a season. Sweat and grass stains don’t need high heat to shift — they need the right detergent and a decent spin, not a boil wash.
If you’re dealing with blood, mud or heavily soiled kit after a match, treat stains before the wash rather than pushing the temperature up to compensate. A pre-soak or stain treatment does more than an extra 20°C ever will.
Tumble drying: the step that actually does the damage
Air dry where you can. If you must use a dryer, use a low heat setting and pull kit out while it’s still slightly damp rather than running a full “cupboard dry” cycle. Full heat tumble drying is where most of the shrinkage in a season actually happens — not in the wash. This matters more for printed and numbered kit, because the heat that shrinks the fabric also cracks and lifts the heat-transfer vinyl, so you lose the shirt twice over.
If your club or school is washing kit in volume — a full squad’s worth, week after week — this is exactly the kind of detail that gets missed when kit washing is split between parents, players and whoever’s got the washing machine free. A laundry provider running kit through calibrated cycles at the right temperature every time removes the guesswork, and it’s one of the reasons clubs move their kit onto a commercial workwear laundry contract once the squad gets big enough to make home washing unreliable.
Fit that’s already tight from the start
Not all shrinkage is laundry-caused. Modern match kit is often cut athletic — tight through the body and sleeves by design, not by accident. If a shirt feels too small after one wash at the right temperature, check it against the manufacturer’s size chart before assuming the laundry is at fault. Some ranges run a size smaller than you’d expect compared with training kit from the same supplier.
What to check before you reorder a whole kit run
- Read the label on the actual printed shirt, not the generic care instructions for the range — printed and numbered kit sometimes carries a lower temperature limit than the plain version.
- Separate dark and light kit and wash at the lowest temperature the label allows, not the highest you think is “safe”.
- Air dry whenever the fixture list allows it. If Saturday’s kit needs to be ready by Wednesday, there’s time to air dry.
- Avoid fabric softener on technical fabric — it coats the fibres and affects moisture-wicking, which is a separate problem but worth fixing at the same time.
If you’re washing in volume — a full academy, multiple squads, or kit that needs a fast turnaround between matches — the margin for error gets smaller, not bigger, because you’re less likely to catch one shirt washed wrong before it’s been through a hot dryer with forty others. A laundry contract set up with the right programme for the fabric removes that risk and keeps the whole kit run consistent, which matters as much for brand and sponsor presentation as it does for fit.
Get your kit washing sorted properly
Talk to us about a laundry contract set up for the fabric you’re actually using, not a generic hot wash.
